Kramer Electronics Vacuum Cleaner VS-81H User Manual

 

 

To connect the VS-81H 8x1 HDMI Switcher (as illustrated in 

), do the 

following: 

1. If 

required: 

ƒ

 

Set the appropriate INPUTS to the DVD mode (see 

) 

ƒ

 

Acquire the EDID (see 

Section  6.2

2.  Connect the HDMI sources as follows: 

You do not have to connect all the HDMI sources. 
Alternatively, you can connect a PC to any of the inputs and set those inputs to the PC 
mode (see 

Section  6.1)

 

ƒ

 

A multimedia player to INPUT 1 

ƒ

 

A set top box to INPUT 2 

ƒ

 

A DVD player to INPUT 6 

ƒ

 

A DVD player to INPUT 8 

3.  Connect the OUTPUT HDMI connector to an HDMI acceptor (for example, a 

plasma display). 

4.  If required, connect a PC and/or controller to the RS-232 port (see 

Section 6.3

) and/or the ETHERNET port (see 

). 

5.  Connect the power connector to the mains electricity (not shown in 

). 

Press an INPUT SELECTOR button (from 1 to 8) to choose the HDMI input to 

route to the output. 

 

Always switch off the power to each device before connecting it to your 
VS-81H. After connecting your VS-81H, connect its power and then 
switch on the power to each device.