Kramer Electronics Vacuum Cleaner VS-81H User Manual

 

3.  Keep pressing and holding the PANEL LOCK button for a few seconds and 

then release it. 

The LOCK button flashes. 

If an input button illuminates, this indicates that that input is set to the DVD 

mode.  

If an input button is not illuminated, this indicates that that input is set to the 

PC mode. 

4.  Press an input to toggle between the PC mode (input button not illuminated) 

and the DVD mode (input button illuminated). 

5.  To exit this mode, press the PANEL LOCK button. 

6.  Connect a computer to the input that is set to the PC mode and a DVD to the 

input that is set to the DVD mode. 

The following table summarizes the differences between the PC mode and the 

DVD mode: 

 

The input is connected to a computer  

The input is connected to a multimedia 
application, such as a DVD, a set top box 
and so on 

The EDID is available at all times (to prevent 
computer reset) 

The EDID is available only when the input 
and an output are connected 

The input EDID source is the default EDID 
or an acquired EDID (see 

Section  6.2

The input EDID source is acquired directly 
from the connected output 

The acquired EDID is used when an input is set to the PC mode. 

To acquire the EDID, do the following: 

1.  Turn the POWER off. 

2.  Press the PANEL LOCK button and the INPUT 8 button while turning the 

POWER on again. 

The INPUT buttons flash in sequence until the unit has completed to read 

the EDID.