Eaton Electrical POW-R-COMMAND 1000 User Manual

 

 Pow-R-Command 1000 LCD Display  Instruction Leaflet IL01412010E  

 

©

 

Copyright 2006

 

Hit 

 

 to select Group A. The following menu is displayed:

A. Associate Loads With the Group

Hit 

 

 to select 

 

Associate Loads

 

. The following screen is 

displayed:

There are two ways to choose which loads are associated with the 
group. Hitting 

 

 on the 

 

Select loads for this group 

individually

 

 will present the following screen:

Each load (breaker) will be listed by panel, followed by its current 
membership in this group (

 

YES/NO

 

) and by its description, if one has 

been entered (

 

LIGHTING – R102

 

 in the above example). Use 

DOWN to scroll up and down through the breaker list and SEL to 
change to membership setting to 

YES

 or 

NO

. After all loads have been 

selected for this group, hit BACK twice to return to the 

CONFIGURE 

GROUP A

 screen.

The second option for associating loads is the 

Add all loads

 

method. To use this option, turn ON the primary handle and the con-
trol handle for all loads that will be part of this group. Turn OFF the 
primary handle for all loads that will not be part of this group. Then 
UP/DOWN to move to the 

Add all loads

… option. Hit SEL to 

choose all currently 

ON

 breakers. This may take several minutes while 

all breakers are scanned. After all loads have been selected for this 
group, hit BACK twice to return to the 

CONFIGURE GROUP A

 screen.

  CONFIGURE GROUP A

Group A  GRPA    ON

 OFFICE LIGHTING

Associate Loads______

Associate Inputs

Modify Schedules

Modify Description

ASSOCIATE LOADS

   With Group A

Select loads for this

   group individually

Add all loads which 

   are currently ON

Clear all loads from

   this group

PICK GROUP A LOADS

USE SEL to TGL LOAD

PNL1 Load 16 BK16 YES

 LIGHTING – R101

PNL1 Load 17 BK17 YES

 LIGHTING – R102_____

PNL1 Load 18 BK18 NO

B. Associate Inputs With the Group

If a switch input will be associated with this group, use UP/DOWN to 
highlight the 

Associate Inputs

. Hit SEL to move to the input 

select screen:

Use UP/DOWN to cycle through the available inputs. When the 
correct input is displayed, hit SEL to associate it with the group. 
The input type screen will then be displayed:

The list of input types extends beyond one page. Use UP/DOWN to 
scroll through the choices and highlight the correct switch type. Hit 
SEL to choose it.

Note: Three-way and 3-wire momentary switches require two physi-
cal inputs paired together. Inputs 1 and 2, 3 and 4, 5 and 6, etc., are 
paired together by the system. Selecting either one of them as the 
input will cause the other to be automatically selected for these types 
of switches.

The 

delay time

 screen will be shown next:

To have the load stay on for a certain number of minutes after the 
input has turned off, use UP/DOWN and SEL to pick a number of min-
utes. Otherwise, hit SEL on the 

None

 value. A value other than 15, 30 

or 45 can be entered by choosing the 

enter exact time

 selection.

Hit BACK three times to return to the 

CONFIGURE GROUP A

 screen.

INPUT for GROUP A

  is currently #7

Change input to:

Input  7  DI01  (OFF)

 Maintained +  5 min_

Use up/down to change

Input, SEL to accept

Select the type of

 switch on Input 7

Maintained__________

Maintained(inverted)

Momentary ON / OFF

Maintained Change

Motion Sensor

Photocell 

Select the delay time

 time for Input 7

-15 minutes

None_________________

15 minutes

30 minutes

45 minutes

(enter exact time)