Fujitsu Siemens Computers Stylistic 3400 Leaflet
Stylistic 3400 is a trademark of Fujitsu PC Corporation. © 2000 Fujitsu PC Corporation
3/00 2
of
2
58-0714-00A
Using the External Battery Charger
0
Please note that this equipment can be used only for
charging the Stylistic 3400 battery pack FMW42BP1.
Using this charger with other battery packs may cause
damage to both the charger and the battery pack
connector pins.
charging the Stylistic 3400 battery pack FMW42BP1.
Using this charger with other battery packs may cause
damage to both the charger and the battery pack
connector pins.
To charge a battery pack:
0
1. Connect the AC adapter to the battery charger, then
plug the adapter to a main power outlet. The power
indicator should turn on (green).
indicator should turn on (green).
2. Install up to two discharged battery packs into the
battery slots, as shown in Figure 2.
When the battery pack is fully charged (at 100% level),
the indicator changes to green and charging
automatically stops.
the indicator changes to green and charging
automatically stops.
The charged battery pack is now ready to use with your
Stylistic 3400 pen tablet.
Stylistic 3400 pen tablet.
3. When the charger is not in use, disconnect the AC
adapter.
Issues to consider when using the battery charger:
0
• Only one battery pack can be charged at a time.
If two battery packs are inserted, they will be
charged in the order they were inserted.
charged in the order they were inserted.
• You can insert up to two battery packs at a time in
the battery charger. If you inserted two battery packs,
either battery pack can be inserted or removed
independently.
either battery pack can be inserted or removed
independently.
Figure 2. Installing battery packs
BATTERY
PACKS
PACKS
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the
following measures:
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Fujitsu PC Corporation could void the user’s authority to operate this
equipment.
equipment.