Jensen JDTV-750 User Manual
JDTV-750 User Manual, page 13
(iv) Press
the
j button on the remote to scroll down through the channels.
(v)
Press the MENU on the TV or EXIT on the remote three times to return to
normal viewing.
4. Favorite
(i) Press
i and j buttons on the remote to select.
(ii) Press AUTO/OK on the TV or ENTER on the remote to set your favorite
channel.
You can edit more than one program as favorite program by this option. Once a
program is chosen, a “V” will appear next to the channel.
program is chosen, a “V” will appear next to the channel.
5. Channel
No.
Displays the current channel you are currently viewing.
6. Channel
Label
Displays the call letters of the TV station you are
currently viewing.
(i)
currently viewing.
(i)
You can edit the channel label by pressing the
OK or ENTER button.
OK or ENTER button.
(ii) Use
the
i / j and g / h buttons on the remote
to edit the name you want displayed for the
channel.
channel.
(iii) Press the AUTO/OK on the TV or ENTER on
the remote when completed.
7. DTV
Signal
Displays the signal strength or the TV station you are currently viewing.
TV OPERATION
SELECT A PROGRAM CHANNEL
1. Press CH + button to play next channel.
2. Press CH - button to play previous channel.
3. Press numeric buttons on the remote control allow direct access to the channel you want
2. Press CH - button to play previous channel.
3. Press numeric buttons on the remote control allow direct access to the channel you want
to watch.
Example:
Channel 9, press "9" and three seconds later, it will automatically switch to channel 9. You
can also press the “9” followed by the ENTER button to avoid the three second delay and get
instant access to the channel.
Channel 12, press "1" and "2" and three seconds later, it will automatically switch to channel
12. You can also press the "1" and "2" followed by the ENTER button to avoid the three
second delay and get instant access to the channel.
Note: If one frequency spot has more than one channel, for example, you want select
<Ch14 No.2>, Press 1 and 4, then press - and input 2. Once the input is done, it will start
broadcasting the selected channel immediately.
Channel 9, press "9" and three seconds later, it will automatically switch to channel 9. You
can also press the “9” followed by the ENTER button to avoid the three second delay and get
instant access to the channel.
Channel 12, press "1" and "2" and three seconds later, it will automatically switch to channel
12. You can also press the "1" and "2" followed by the ENTER button to avoid the three
second delay and get instant access to the channel.
Note: If one frequency spot has more than one channel, for example, you want select
<Ch14 No.2>, Press 1 and 4, then press - and input 2. Once the input is done, it will start
broadcasting the selected channel immediately.
VOLUME CONTROL
1. Press the VOL+ or VOL- to adjust the level of currently volume.
2. The level of VOLUME can be adjusted from 0-30.
2. The level of VOLUME can be adjusted from 0-30.
MUTE CONTROL
Press the MUTE button to mute the sound, press it again to switch ON the sound.