Mustek GSmart 350 User Manual

No power.

1. Batteries not loaded correctly.

2. Dead batteries.

1. Re-install batteries.

2. Replace batteries.

Sudden power

failure.

1. Low battery power.

2. Auto Power Off function

    engaged.

1. Replace batteries.

2. Turn Power On.

No capture when

shutter is depressed.

1. Camera not in View mode.

2. BUSY icon appears.

3. Memory is full.

4. Flash is charging.

1. Set camera to View mode.

2. Wait for camera to re-adjust.

3. Delete images in camera’s memory.

4. Wait for flash icon to stop blinking on OSD.

Flash does not work. 1. Flash is set to OFF.

2. USB is connected to the camera.

3. Environment is bright enough.

1. Set flash to AUTO in RECORD of OSD.

2. Disconnect the USB cable.

3. Continue capturing images.

Image is too bright

 too dark.

1.Exposure(EXP) setting is

   unsuitable.

1. Adjust EXP(exposure) setting while capturing

    images with up/down arrows Or change EXP

    setting in RECORD category of OSD.

Device not ready

Connection failure.

1. Camera is not powered on.

2. USB not connected properly.

3. USB data transfer error.

4. Hardware compatibility problem.

5. Insufficient USB power

1. Power on the camera.

2. Ensure USB cable is connected.

3. Unplug and reconnect the USB cable.

4. Contact your computer vendor for help.

5. Ensure USB connects directly to computer

    host port, NOT keyboard or other port.

Cannot transfer data.

1. Incorrect cable connection.

2. Camera is not turned on.

1. Reconnect the cables.

2. Turn on the camera.

CF Card error.

1. CF Card may not be formatted.

1. Format card through the OSD function.

: You will delete all data on the CF Card if

you reformat your CF Card.