Citrix Systems Network Router NETSCALER 9.3 User Manual
To modify or remove NTP servers by using the NetScaler
command line
w
To modify settings for an NTP server, type the set ntp server (<serverIP> |
<serverName>) command and the parameters to be changed, with their new values.
<serverName>) command and the parameters to be changed, with their new values.
w
To remove an NTP server, type rm ntp server (<serverIP> | <serverName>)
Parameters for configuring an NTP server
serverIP
IP address of the NTP server.
serverName
Domain name of the NTP server.
minpoll
Minimum number of seconds after which the NTP server must poll the NTP messages,
expressed as a power of 2. Minimum value: 4 (2^4=16 seconds). Maximum value: 17
(2^17=131072 seconds). Default: 6 (2^6=64 seconds).
expressed as a power of 2. Minimum value: 4 (2^4=16 seconds). Maximum value: 17
(2^17=131072 seconds). Default: 6 (2^6=64 seconds).
maxpoll
Maximum number of seconds after which the NTP server must poll the NTP messages,
expressed as a power of 2. Minimum value: 4 (2^4=16 seconds). Maximum value: 17
(2^17=131072 seconds). Default : 10 (2^10=1024 seconds).
expressed as a power of 2. Minimum value: 4 (2^4=16 seconds). Maximum value: 17
(2^17=131072 seconds). Default : 10 (2^10=1024 seconds).
To configure an NTP server by using the configuration utility
1. In the navigation pane, expand System, and then click NTP Servers.
2. In the details pane, do one of the following:
• To add a new NTP server, click Add.
• To modify settings for an existing NTP server, select the NTP server, and then
click Open.
3. In the Create NTP Server or Configure NTP Server dialog box, specify values for
the following parameters, which correspond to parameters described in
“Parameters for configuring an NTP server” as shown:
“Parameters for configuring an NTP server” as shown:
• NTP Server*—serverIP or serverName (Cannot be changed for an existing NTP
server.)
• Minimum Poll—minpoll
• Maximum Poll—maxpoll
* A required parameter
4. Click Create or OK, and then click Close.
A message appears in the status bar, stating that the NTP server has been
configured successfully.
configured successfully.
Citrix NetScaler Administration Guide
127