Citrix Systems Network Router NETSCALER 9.3 User Manual

At the NetScaler command prompt, type:

rm appflowCollector <name>

Name of the collector to which to export data. Maximum characters: 255.

The IPv4 address of the collector.

The UDP port on which the collector is listening. Default port: 4739.

1. In the navigation pane, expand AppFlow, and then click Collectors.

2. In the details pane, click Add.

3. In the Create AppFlow Collector dialog box, specify values for the following

parameters, which correspond to parameters described in "Parameters for
specifying a collector" as shown:

• Name*—name (cannot be changed for an existing collector)

• IP Address*—ipaddress (cannot be changed for an existing collector)

• Port—port (cannot be changed for an existing collector)

*A required parameter

4. To remove a collector from the list, select the collector, and then click Remove.

5. Click Create, and then click Close.

An Appflow action is a set collectors, to which the flow records are sent if the
associated Apflow policy matches.

At the NetScaler command prompt, type the following commands to configure an
Appflow action and verify the configuration:

w

add appflow action <name> --collectors <string> ... [-comment <string>]

w

Chapter 7

 AppFlow

172