Autostart CT-5060 User Manual
Car Finder
When enabled, the Car Finder option will help you locate your vehicle by sending a
pulsating signal through the horn or the siren. To hear the signal, press the
LOCK
and
UNLOCK
buttons simultaneously. This will produce a pulsating signal for the time you keep
the buttons pressed.
Diagnostics – Chirps Diagnostics – Parking Lights
Parking Lights Flash Rate (Normal Operation)
Flashes
Description
1
• Doors locked, Starter Kill armed.
• End of Run Time.
•
TRUNK
button pressed
• Start signal received by the Module.
• Cold Weather Mode cancelled.
•
Cannot start after maximum number of attempts is reached.
2
• Run Time cancelled.
• Remote start attempt cancelled by remote.
• Doors unlocked, Starter Kill disarmed.
• Exit Remote Valet
• Exit ignition valet
Chirps
Description
1
•
Lock and arm the system.
•
Lock confirmation.
•
Entering Mode 1 in the programming options.
•
Start attempt when engine is already running under remote control.
2
•
Unlock and disarm.
•
Transmitter learnt.
•
Entering Remote Valet.
•
Entering Mode 2 in programming options.
3
•
Lock and arm – a zone is unprotected.
•
Entering Mode 3 in the programming options.
4
•
Unlock and disarm – an intrusion occurred.
•
Entering Tach Learning procedure.
5
•
Siren or Horn Chirp Timing adjustment.
Constant up
to
60 seconds
•
In Siren Mode: alarm condition generated by an intrusion, by Panic
Mode or when the Module is powered up. The Siren will sound for
60 sec.
Constant up
to
30 seconds
•
In Horn Mode: alarm condition generated by an intrusion, by Panic
Mode or when the Module is powered up. The Horn will sound for
30 sec.
P. 9
User Guide
CT-5060