Christie Digital Systems ROADIE S12 Leaflet

Page of 2
Copyright 2003 Christie Digital Systems, Inc.. All rights reserved. All brand names and product names are trademarks,
registered trademarks or tradenames of their respective holders. Canadian manufacturing facility is ISO 9001 certified.
Due to constant research,
specifications are subject to
change without notice
.
July 03-NA
Brightness
12000 ANSI lumens at 1.9 kW
operation (typical)
Over 90% brightness uniformity across
the screen
Contrast Ratio
Greater than 250:1 ANSI, greater than
400:1 full field
Resolution/Digital Processing
3-chip 1.1" DMD™‚ (Digital
Micromirror Device) system
True SXGA 1280 x 1024 chip resolution
13-bit user selectable gamma table
More than 1 billion displayable colors
Dynamic Scaling
Resizing capabilities to scale down
from 1600 x 1200 and up from 
640 x 480 to SXGA resolution
Independent horizontal and vertical
size adjustment for graphics and 
video inputs
Horizontal Frequency Range
15 to 120 kHz
Vertical Frequency Range
24 to 120 Hz
Field Interchangeable Optional Lenses
Fixed short throw lens XGA 0.8:1
becomes 0.64:1 for SXGA
Short zoom XGA lens: 1.5 2.5: 1
becomes 1.2-2:1
Zoom XGA lens 2.5-4:1 becomes 
2-3.2:1
Zoom XGA lens 4-7:1 becomes 
3.2-5.6:1
Screen size 1.5m - 12.2m (5ft - 40ft)
diagonal 
Power Lens Mount
Fully-motorized (with manual override)
lens focus, zoom, horizontal and 
vertical offset
Unique ILS™ (Intelligent Lens System) –
Lens position (zoom, focus, horizontal
and vertical offset) is automatically
recalled during channel switching
Lens mount tilt adjustment 
Built-in light shutter
Inputs
Built-in RGB/YUV/YPbPr inputs
allowing separate H and V syncs, 
composite sync and sync-on-green/
luma (5 BNC connectors)
Multi-standard Video Decoder Module
(NTSC 3.58, NTSC 4.43, PAL, PAL  60,
PAL M, PAL N, SECAM) with one
composite video input (BNC and RCA 
connectors) and one S-video input (two
BNC and 4-pin mini-DIN connectors)
Slot for an optional input module
Full compatibility with third-party
switchers
HDTV/DTV Compatibility
Full HDTV/DTV compatibility on
analogue RGB/YPbPr inputs 
Accepts 480i, 480p, 576i, 576p, 720p,
1035i, and 1080i formats at all
applicable frame/field rates
Accepts 1080p at 24, 25 and 30 Hz
frame rates
Optional HDTV Serial Digital Input
Module
Various Keypads 
Standard hand-held IR backlit 
remote keypad, front and rear 
infrared sensors
Built-in backlit keypad
Optional RS422 two-way remote
controller with LCD display using 
6-pin XLR connector with range of
600ft (183m) 
Optional wired backlit remote keypad
with 3-pin XLR connector
Control/Networking 
Third party control system and
switcher compatibility
Dual RS232 ports for computer
control, with loop-through for
connection of multiple projectors
Dual RS422 ports for connection of
optional LCD two-way controllers and 
loop-through to multiple projectors up
to 600ft (183m)
Diagnostics
Built-in LCD diagnostic display indicates
operational status and error messages 
Power and Status LED
Full diagnostics through RS232 9-pin 
D connector
Graphical User Interface
Auto set-up feature 
“Direct Access” intuitive user interface
for complete projector control in 
5 world languages
On-screen user movable menus to fit
different image aspect ratios
(4:3, 5:4, 16:9, etc.)
On-screen help menus
100 channel memories
Auto power feature
Lamp Specification/Color
Temperature
1900W SHB Xenon illumination system
Constant color temperature over 
the lamp life
Color temperature adjustment range:
32000K to 93000K
User replaceable lamp within 
5 minutes 
Typical lifetime: 1000 hours 
Variable Lamp Power Supply
User adjustable lamp power, levels 
as low as 1000W
Power Requirements
Line voltage 220V AC to 240 VAC 
+/- 10% @ 50/60 Hz
Power consumption: 2800 W
maximum
Thermal dissipation: 9500 BTU/hr
Size and Weight 
225 lbs (102kg) 
29" W x 54" L x 16" H 
73.6cm W x 137.16cm L x 40.64cm H
Standard Accessories
IR remote keypad with batteries
User manual with warranty card
Optional Accessories
Serial Digital Input (SMPTE 259M/CCIR
601) with loop-through feature
Digital HDTV Input module (with loop-
through feature) compatible with 
all known HDTV formats
PanelLink™ Input module
Compatible with all Marquee 
Input modules
RS422 two-way remote LCD controller
Replacement lamp module
Remote infrared sensor
Service manual
Librarian communication software
Transit case
Regulatory Approvals
CSA, UL and European safety
approvals
North American and European
EMI/EMC approvals
Warranty
Two years parts and labor
Accessories: 90 days
Roadie S12
Specifications
100% digital solution from
source to screen.
Suite of custom accessories including
custom short throw, fixed and zoom
lenses, stacker kit, remote LCD controller. 
Dynamic scaling - horizontal 
and vertical adjustment for 
video and data.
F E AT U R E S
WWW.CHRISTIEDIGITAL.COM
Corporate Offices
USA
10550 Camden Drive
Cypress, CA  90630
PH: 714-236-8610
FX: 714-503-3385
Toll free: (800) 407-7727 (NA only)
sales-us@christiedigital.com 
CANADA
809 Wellington Street North
Kitchener, Ontario  N2G 4Y7
PH: 519-744-8005
FX: 519-749-3136
Toll free: (800) 265-2171 (NA only)
sales-canada@christiedigital.com 
Branch Offices
UNITED KINGDOM
PH: +44 118 977 8000
FX: +44 118 977 8100
sales-europe@christiedigital.com
SINGAPORE
PH: +65 6877-8737
FX: +65 6877-8747
sales-singapore@christiedigital.com
FRANCE
PH: +33 (0) 1 47 48 28 07
FX: +33 (0) 1 47 48 26 06
Mobile: +33 (0) 6 76 47 43 62
sales-france@christiedigital.com
GERMANY
PH: +49 2161 664540
FX: +49 2161 664546
sales-europe@christiedigital.com
CHINA
PH: +86 21 6278 7708
FX: +86 21 6278 7707
sales-china@christiedigital.com
MIL5810