Carbine M9900DVDS User Manual
Disc Formats Supported by this Player:
Discs which Cannot be Played with this Player
• DVD-ROM
• DVD-R/DVD-RAM
• CDV
• CD-G
Handling and Cleaning
• Dirt, dust, scratches and warping disc
will cause non operation.
• Do not place stickers on disc or
scratch disc.
• Do not warp discs.
• A disc should always be kept in its case when not
in use to prevent damage.
• Do not place discs in the following places:
1. Direct sunlight.
2. Dirty, dusty and damp areas.
3. Near car heaters.
4. Car seats or dashboard.
Disc Cleaning
Use a dry soft cloth to wipe the surface. If the disc
is quite dirty, use a soft cloth slightly moist with
isopropyl (rubbing) alcohol. Never use solvents
such as benzine, thinner or conventional record
cleaners as they may mar the surface of the disc.
Note:
A disc may become somewhat scratched
(although not enough to make it unusable)
depending on handling and conditions in the
usage environment.
Preparing New Discs with Rough Spots
A new disc may have rough edges on its inside
and outside edges. If a disc with rough edges is
used, the proper setting will not be performed and
the player will not play the disc. Therefore, remove
the rough edges in advance by using a ball point
pen or pencil as shown. To do this, press the side
of the pen or pencil against the inside and outside
edges of the disc.
V I D E
O
Label side up
Do not touch
the underside
of the disc
the underside
of the disc
Do not bend
Wipe the disc from center
toward the outside edge
toward the outside edge
Rough spots
on inside edge
on inside edge
Ball point pen
or pencil
or pencil
Rough spots on
outside edge
outside edge
Disc Notes
3
M9900DVDS-UM 4/26/06 14:15 Page 3