Jensen BT250 User Manual

   

8 

recognition   

Press to disconnect a call. Press and hold for two seconds to 
activate the Voice Recognition function. After the tone, repeat 
your pre-recorded voice tag: the number automatically dials.   
Press to reject an incoming call. *Phone MUST Support voice 
recognition.  

Lights after pairing and during calls. Indicates power is on. 

 

To use a phone with the BT250 you must first pair the phone and the 

BT250. Pairing is the process of linking the two products together. 

1.  DO NOT attempt to pair a phone while driving. Park your car 

and with the ignition on proceed.   

2.  Press and hold the Answer/redial and Volume-Down buttons at 

the same time until you hear a tone and the LED begins to flash. 

If the light is already flashing attempt to pair. 

3.  Be sure Bluetooth is enabled on your phone.  Follow the 

documentation provided with your phone to search for new 

devices. 

4.  Select the BT250 from the list of Bluetooth devices on your 

phone. 

5.  Enter the passcode: 1234. 

6.  The LED will stop flashing when the phone is paired. 

Note: You may follow the above steps to pair a second, third and 

fourth phone.    Pairing a fifth phone will cause the first pairing to be 

deleted.