LG Aria 20A User Manual
●
aria
20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE:
aria
20A,
aria
20,
aria
20W
18
Attendant Operation
To Set Current Time 1 Hour Early/Late
Button
Procedure
To set the current time 1 hour early,
Press TRANS/PGM button.
Dial * 1.
Dial * 1.
To set the current time 1 hour late,
Press TRANS/PGM button.
Dial * 2.
Dial * 2.
Button
Procedure
To store system speed numbers,
Press TRANS/PGM button.
Dial SPEED button.
Dial speed number bin.
Dial the phone numbers to be stored.
Dial HOLD/SAVE button.
Dial SPEED button.
Dial speed number bin.
Dial the phone numbers to be stored.
Dial HOLD/SAVE button.
A group of speed dial numbers can be stored within the system for access by allowed stations. These numbers provide
speedy access to often used outgoing CO dialing numbers.
speedy access to often used outgoing CO dialing numbers.
20/16/20W : 21~99
System Speed Dial
Or, speed dial by line number:
Press TRANS/PGM button.
Dial SPEED button.
Dial speed number bin.
Press desired outside line button.
Dial the phone numbers to be stored.
Dial HOLD/SAVE button.
Dial SPEED button.
Dial speed number bin.
Press desired outside line button.
Dial the phone numbers to be stored.
Dial HOLD/SAVE button.
To use system speed numbers,
Press SPEED button.
Dial speed number bin.
Dial speed number bin.
20/16/20W : 21~99
Attendant Intrusion
Button
Procedure
To activate attendant intrusion
Press CO button you wish to converse. (If intrusion is allowed by Admin program, then 3 way conversation
is set up. If intrusion is not allowed, busy tone will be heard.)
Requires Installer Programming Settings.
Attendant may intrude into any station which is in conversation with a CO line.
Day/Night Mode Service
To activate/deactivate Day/Night/On-demand mode manually,
Press DND/FWD button at attendant station.
Then, DND/FWD button is flashing. (The system is in On-demand mode.)
If pressing the DND button one more, then the system is in Night service mode.
On-demand mode is not activated automatically. (Auto Ring Mode – see below)
Then, DND/FWD button is flashing. (The system is in On-demand mode.)
If pressing the DND button one more, then the system is in Night service mode.
On-demand mode is not activated automatically. (Auto Ring Mode – see below)
Button
Procedures
The attendant station can be placed into night service mode allowing ring assignments and answering privileges to station
not having the privileges in the day mode. In aria 20/16/20W,Day/Night mode change is available by pressing DND button at
attendant station.
not having the privileges in the day mode. In aria 20/16/20W,Day/Night mode change is available by pressing DND button at
attendant station.
To activate/deactivate Day/Night/Auto Ring mode manually,
Pressing DND/FWD button, the ring mode is changed to Night
→
Auto Ring
→
Day mode in sequence.
Button
Procedures
The system can be placed in Day/Night/Auto Ring mode operation manually by pressing [DND/FWD] button at attendant
station. In Auto ring mode, the ring mode will follow the Weekly Time Table in Installer Programming. Available for ver 4.0(aria
16) and 3.0(aria 20W), all aria 20
station. In Auto ring mode, the ring mode will follow the Weekly Time Table in Installer Programming. Available for ver 4.0(aria
16) and 3.0(aria 20W), all aria 20
Auto Ring Mode Service
To activate Auto ring mode with Attendant PGM mode,
The Weekly Time Table should be entered by Admin Programming