Lucent Technologies Speaker 585-210-940 User Manual

4. From the 

ok

 prompt, do a reconfigure boot by entering the following 

command:
______________________________________________________

ok

boot

-r

______________________________________________________

5. Log in as 

root.

6. Enter the following command:

______________________________________________________
#

ls

-l

/dev/dsk/c2t6d0s0

______________________________________________________

The system should respond with a line similar to the following:
______________________________________________________

lrwxrwxrwx

1

roor

roor

50 Nov 16 08:58 

/dev/dsk/c2t6d0s0 -> ../../devices/sbus@3,0 

/SUNW,fas@3,8800000/sd@6,0:a

______________________________________________________

Notice that c2t6d0s0 is pointing to sd@6,0:a, indicating that the CD-
ROM drive is now on controller 2.

2

Install the new disk drives, which will form the mirror, into the empty slots 
reserved in step 1. Follow the procedure in the “Add a Disk Drive” 
subsection in the Lucent Technologies hardware installation or hardware 
maintenance manual for your version of CMS. DO NOT PARTITION THE 
DISKS JUST YET; that happens next.

2

Partition the newly installed disks using the 

format

 command. If you 

have an 

Enterprise 3500, make certain that the new drives are named 

using “c1,” as c1t4d0 or c1t5d0.

The procedure is as follows:

1. Enter:

#

format

A menu of disks displays. You are asked to select one.

2. Enter the menu number of the new disk to be partitioned.

The 

format>

 prompt displays.

3. Enter:

format>

partition

The

 partition> 

prompt displays.