LSI SAS2 User Manual

SAS2 Integrated RAID Solution User Guide

Appendix A:

Commands

LSI Corporation Confidential

August 2010

Page 41

A.3.11 LOCATE Command

The LOCATE command locates a specific drive in a volume by turning on its location
indicator and flashing its LED.

Command Line

sas2ircu <controller_#> locate <Enclosure:Bay> <action>

Parameters



<controller_#> – The index of the controller with the drives that you need
to locate.



<Enclosure:Bay> – The enclosure and bay number of the drive.



<action> – The possible actions are as follows:
—

ON – Turn on the location indicator of the drive.

—

OFF – Turn off the location indicator of the drive.

Program Return Value

0x00

SUCCESS: Command completed successfully.

0x01

FAILURE: Bad command-line arguments or operational failure.

0x02

ADAPTER_NOT_FOUND: Cannot find specified adapter.

A.3.12 LOGIR Command

The LOGIR command uploads or clears the Integrated RAID log information.

Command Line

sas2ircu <controller_#> logir <action> [filename] [noprompt]

Parameters



<controller_#> – The index of the controller with the logs that you need to
upload or clear.



<action> – The possible actions are as follows:
—

UPLOAD – Upload the controller logs to a file.

—

CLEAR – Clear the controller logs.



filename – This optional parameter specifies the filename where the logs must
be uploaded. The default filename is

LOGIR.LOG.



noprompt – This optional parameter prevents warnings and prompts from
appearing while the command is running.