GE PB930SJSS Specification Sheet
Specification Revised 7/15
For answers to your Monogram,
®
GE Profile
™
or GE
®
appliance questions, visit our website
at geappliances.com or call GE Answer Center
®
service, 800.626.2000.
Listed by
Underwriters
Laboratories
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
PB930SJ
GE Profile
™
Series 30" Free-Standing Electric Convection Range with Warming Drawer
30
25
2-1/2
2-1/2
14-1/2
7-1/2
7
Acceptable electrical
outlet area
On models with warming drawers,
electrical outlet must not
be in this area.
29-7/8
47
11
35-3/4
to
36-1/2
w/o handle
w/handle
47-7/8
28
25-1/2
30" Free-Standing Electric Single Oven
RecePtacle locationS
Locally approved flexible service cord or conduit must
be used because terminals are not accessible after range
installation. See shaded area in drawing for location of
installation. See shaded area in drawing for location of
electrical outlet box. Recommended outlet locations allow
range to be installed directly against wall.
note: This appliance has been approved for 0" spacing
note: This appliance has been approved for 0" spacing
to adjacent surfaces above the cooktop. However, a 6"
minimum spacing to surfaces less than 15" above the
cooktop and adjacent cabinet is recommended to reduce
minimum spacing to surfaces less than 15" above the
cooktop and adjacent cabinet is recommended to reduce
exposure to steam, grease splatter and heat.
inStallation infoRmation: Before installing,
inStallation infoRmation: Before installing,
consult installation instructions for current dimensional
data and additional requirements.
data and additional requirements.
KW Rating
240V 15.5
208V 11.6
208V 11.6
Breaker Size
240V 40 Amps
†
208V 40 Amps
†
†
note: Check local codes for required breaker size.
DimenSionS anD inStallation infoRmation (in incheS)