TP-LINK Single Parallel Port Fast Ethernet Print Server TL-PS110P User Manual

 

DHCP/BOOTP: This option allows you to select DHCP/ BOOTP option. If there is a 

DHCP/BOOTP server on your network. This option allows the print server 
to obtain IP-related settings automatically from your DHCP server. 

IP Address: This option allows you to input IP address from the print server. The IP address 

must meet the IP addressing requirements of the network segment. 

On the TCP/IP Setup screen, specify a fixed IP address is highly 
recommended. 

Subnet Mask: This option allows you to input subnet mask from the print server. The IP 

address must meet the IP addressing requirements of the network segment. 

Gateway: This option allows you to input gateway from the print server. This IP address of 

gateway must meet the router or gateway to go across of the network 
segment. 

Rendezvous Settings: Enable/Disable the Rendezvous support for Mac OS 10. 

 
 

 

1.Log into your NetWare file server as a Supervisor (Admin.) or equivalent. 

2.Select NetWare and type in the Print server that created during PCONSOLE Select the 

 

4.Click NetWare

NetWare File Server to which the print server device will be attached. 

3.Click Setup, it then appears the sub-menu.  

, it then as shown in the following picture. 

 

 

40