TP-LINK Single Parallel Port Fast Ethernet Print Server TL-PS110P User Manual

 

your print server unit. After assigning an IP address, the print server can b
accordingly. 

e configured 

The first step to install a print server on a TCP/IP network is to assign the print server an IP 

1.   Use the Network Print Monitor utility. 

2.  Manually specify (using DOS commands or UNIX text-mode commands. This   

2000/XP/2003 and UNIX systems). 

 

 
 

address and other related TCP/IP settings before the print server can function. You can 
select the following two methods to specify an IP address the print server. Each method will 
be detailed in the following section. 
 

 

  

applies to Windows NT/

 

Note: The Network Print Monitor can only search for the print server(s) over the same 

network segment the Windows NT/2000/XP/2003/UNIX computer is located. You 
would like to install a print server on a different network segment. 

 

 
 

he print server supports DHCP feature, allowing the print server to obtain an IP address and 

By de

 

Start, point to Settings, and select Printer. 

. Click 

Add Port. 

LPR Port.

 

T
related TCP/IP settings automatically from a DHCP server. While the print server supports 
DHCP, we strongly recommend you manually specify a fixed IP address to the print server. 

fault, the print server’s DHCP function is disabled. 

 
 

 

. Click

1
 
2. Run 

Add Printer. 

 
3.  The Add Printer Wizard screen will appear, Select My Computer and click Next. 
 
4
 

. 

From the Printer Ports box as shown in the following picture, select the 

5
 

                                                                                            53