Lynx LSB22NG Owner's Manual

eleCtrIC IgnItIon

warnIng

never attempt to light a burner if you smell gas.

Always keep the lid open (side-burner lids must be com-

ever attempt to light a burner if you smell gas.

pletely removed) when lighting your grill.

Always keep the lid open (side-burner lids must be com-

Releasing fuel into a closed grill before lighting will in

pletely removed) when lighting your grill.

crease the risk of explosion, property damage , personal

Releasing fuel into a closed grill before lighting will in

injury or death.

crease the risk of explosion, property damage , personal

Keep your face and body as far from the grill as possible

injury or death.

when lighting. Any time a burner doesn’t light within 5

Keep your face and body as far from the grill as possible

seconds, turn off the control, wait 5 minutes for gas to dis-

when lighting. Any time a burner doesn’t light within 5

sipate, and repeat the lighting procedure.

)

efore proceeding, make

sure you have completed

efore proceeding, make

the “

sure you have completed

before

sure you have completed

each

sure you have completed

use”

checklist.
follow these steps to light any

of the burners on your grill:

ollow these steps to light any

first, make

sure all burner

control knobs

are set to off

for the maIn

brass burner

burner:

Push and hold the control

knob in for seconds,

allowing the igniter to heat

up. Then rotate the knob to

“liTe”. After ignition, set

up. Then rotate the knob to

the knob to the desired heat

setting.

before

eaCh

use

Before any use, always make

sure that:

... you do not smell gas

before you light the grill. If

... you do not smell gas

you do smell gas, shut every-

thing off and have a qualified

you do smell gas, shut every

plumber check for leaks.

thing off and have a qualified

…you never leAve

A The

grill unATTended while

CooKing.

… the cooking area is free

and clear of any combustibles,

… the cooking area is free

besides your food, that might

and clear of any combustibles,

ignite.

… the control knobs turn

freely.

… if you are using a

portable propane cylinder, it is

securely connected and leak

portable propane cylinder, it is

tested.

(see indeX: “Cylinder

retention instructions” for details.)

… you know where the

main gas supply shut-off is

… you know where the

located

main gas supply shut-off is

… the burners are seated

properly in the grill with

mounting legs in the slots.

properly in the grill with

strongly or blowing on the

back of grill.

strongly or blowing on the



for the rotIsserIe

burner:

a thermocouple sensor with a

safety valve that automatically

a thermocouple sensor with a

shuts off the flow of gas if the

safety valve that automatically

burner goes out.

(See IndEX:

“windy Conditions” for tips on how

to prevent burner blow out)

To light the rotisserie burner,

push and hold the control

knob in for

push and hold the control

seconds and

push and hold the control

then turn the knob to the

“liTe” position.
After ignition ConTinue

holding The ConTrol

Knob in for 30 to 60

seconds. during this time the

thermocouple will heat up and

the safety valve will remain

thermocouple will heat up and

open.
If you release the control knob

before the thermocouple has

If you release the control knob

heated up, the safety valve

before the thermocouple has

will shut off the flow of gas to

heated up, the safety valve

the rotisserie burner and you

will have to re-light the burner.