Lynx LSB22NG Owner's Manual

19

Your Lynx grill uses an electric 

ignition system that does not 

spark.  The igniters should 

glow constantly when a 

spark.  The igniters should 

spark.  The igniters should 

control knob is pushed in.  

first, confirm that the grill is 

control knob is pushed in.  

control knob is pushed in.  

getting electricity by turning 

on the lights.

CheCK The igniTers 

Ensure that all burner 

controls are set to off. 

off

off

Remove the racks and 

briquette trays.  

Watch an igniter as you 

push in and hold the 

corresponding control 

push in and hold the 

push in and hold the 

knob.  You will need either 

corresponding control 

corresponding control 

a small mirror or shiny 

metal object to see the 

igniter under its cover.  







(Be sure you push in the 

correct control knob and 

(Be sure you push in the 

(Be sure you push in the 

keep the knob in the 

“off

keep the knob in the 

keep the knob in the 

” position)  

keep the knob in the 

keep the knob in the 

check the remaining 

igniters.  If igniters don’t 

heck the remaining 

heck the remaining 

glow, proceed with trou-

bleshooting or match-

glow, proceed with trou

glow, proceed with trou

light the burner. 

chEcK ThE BURnERS

If the igniters are working 

check to see if gas is 

If the igniters are working 

If the igniters are working 

reaching the burners by at-

tempting to match light a 

burner. 

tempting to match light a 

tempting to match light a 

BE cAREfUL! If ThE 

burner fA

ff ils To igniTe, 

wA

w

w iT 5 MinuTes before

ATTeMPTing To igniTe

oTher burners! 

(See 

indeX: “Match lighting” for 

further details.)

If match lighting doesn’t 

work, re-check fuel connec-

If match lighting doesn’t 

If match lighting doesn’t 

tions for leaks and ensure 

the supply is of the correct 

type and is of adequate 

the supply is of the correct 

the supply is of the correct 



if you sMell gAs while

The grill is oPerATing, 

iMMediATely T

ely

ely urn off All

burners And shuT off

The MAin fuel suPPly. 

ly

ly

PerforM A leAK TesT

(see indeX: “leak Test” for 

further details.)

CheCK for blo

CK

CK

CKAges 

(see indeX: “Clean the brass 

burner” for further details.)

X: “leak Test” 

for further details.)

If the burner will light with a 

match, then the igniter may 

not be functioning correctly. 

match, then the igniter may 

match, then the igniter may 

call for service. 

not be functioning correctly. 

not be functioning correctly. 

If the burner will not match 

light, and you know you are 

getting gas, wait for any 

light, and you know you are 

light, and you know you are 

gas to dissipate and remove 

the burner and check it for 

gas to dissipate and remove 

gas to dissipate and remove 

blockages. 

(see indeX: “Clean 

the brass burner” for further details.)

Please check a few things before you call for service

:

Is there fuel supplied to the grill?
is the main shut-off valve open?  
Are you using correct type of fuel? (lP or natural gas) 

(see indeX: “gas requirements” for further 

details.)

is your propane cylinder empty?  have you recently refilled the propane cylinder?  if so, is the 

connection tight?  

s your propane cylinder empty?  

s your propane cylinder empty?  

have you opened the valve on the propane cylinder?
Is the grill plugged in to a live electric circuit?

if you’ve checked the above items, review the trouble-shooting list below before calling for lynx for 

ll

service.