Vinotemp VINOSONOMA250 Manual

Page of 17
                                                                                
6
Installation Instruction 
 
 
 
 
 
1. Cellar Inspection 
 
•  Note any damage by yourself and the installation personals.  
•  Claim the damage with 5 days after receipt. 
 
2. Cellar Location 
 
•  Place the wine cellar in a properly ventilated location. If it is not, heat 
exhausted by the unit will build up and the unit will not operate properly.  
•  Leave 4~6 “clearance between the exhaust side and the wall or ceiling. 
•  Leave 2~4” clearance for the fresh air supply side. 
•  Leave 1~2” for the other sides. 
 
3. Level Adjusting 
 
•  Adjust the level by raising and lowering the feet height using a wrench 
•  Ensure the cabinet stand solidly and the doors flush and seal well. 
 
4. Electrical Cord 
 
•  We strongly recommend against the use of an extension cord. However, if 
you still select to use an extension cord, it is absolutely necessary that it is 
a UL LISTED 3-wire grounding type appliance extension cord. The 
marked rating of the extension cord should be 115 V, 15 A. or equivalent 
and not greater than 15ft in length.