Vinotemp VTREFOUT15 Owner's Manual

 

IMPORTANT: Always unplug your refrigerator before cleaning or performing maintenance. 
Never use harsh cleansers or scouring pads to clean any part of the refrigerator.  

 

•  Exterior: Use a cloth dampened with warm soapy water. Dry thoroughly with a soft cloth. 

To clean the door gasket, use only warm soapy water.  

•  Interior: First remove all food items and the refrigerator shelves and basket. Wash the 

inside cabinet with a plain water and baking soda solution (about 2 tablespoons of 
baking soda to a quart of water). Rinse then dry the inside cabinet. Do not use soaps, 
detergents, powder or spray cleaners which can cause odors inside the refrigerator.  
Wash the shelves and basket in a mild detergent solution and dry with a soft cloth.  

•  Remove all food items from the refrigerator. 
•  Securely tape down all loose items inside the refrigerator.  
•  Turn the leveling screw up to the base to avoid damage.  
•  Tape the door shut.  
•  Ensure the unit stays upright during transportation. Protect the outside of the unit with a 

blanket or similar item. 

 

The light bulb can be replaced with any standard U-shaped, 2-pin compact fluorescent bulb of 5, 
7 or 9 Watts. Do not use any unusual force to remove the old bulb. No tools should be 
necessary. Follow steps A through D to remove the old light bulb. To insert the new bulb, 
reverse steps. Insert the new light bulb into the lamp bracket. Affix the lamp cover onto the 
bracket by gently pushing it upward into place.  
 
  

9 

 

1 7 6 2 1   S o u t h   S u s a n a   R o a d ,   R a n c h o   D o m i n g u e z ,   C a l i f o r n i a   9 0 2 2 1  

i n f o @ v i n o t e m p . c o m