Lynx L1600SLP Use & Care Manual

SEDONA CARE & USE/INSTALLATION

|

cold WeatHer WarninG: ProPane

liGHtinG Your Grill

... continued

If a burner doesn’t light after several attempts, it can be 
match lit using the lighting rod stored in the drip tray. 

First, make sure you’ve returned all of the control knobs 
to the OFF position and have allowed 5 minutes for any 
accumulated gas to dissipate before attempting to match 
light a burner.

To match-light this burner, use the lighting rod to insert a lit 
match through the cooking grate into the front slot of the 
briquette tray for that burner.

Push and turn the corresponding burner control knob to 
“LITE”. If the burner doesn’t light within 5 seconds turn 
the knob off and wait 5 minutes before attempting to 
light it again.

To match-light this burner, use the lighting rod to insert a lit 
match through the cooking grate.

Push and turn the corresponding burner control knob to 
“LITE”. If the burner doesn’t light within 5 seconds turn 
the knob off and wait 5 minutes before attempting to 
light it again.

To manually light this burner, use the lighting rod to hold 
a lit match at the face of the burner, push in and turn the 
control knob to the “LITE” position. Hold the knob in for 
at least 30 seconds. If the burner does not stay lit, turn the  
knob OFF and wait 5 minutes for gas to dissipate before 
attempting to light it again.

Extremely cold temperatures may cause your ProSear™ burner to light 

inside

 the burner instead of 

outside

. Once lit, if you hear a ‘whooshing’ sound, immediately turn the burner knob off to extinguish 

the flame and then immediately re-light the burner.