Fujitsu PRIMERGY RX300 S4 VFY:R3004SP050PL?RAID Data Sheet

USB ports

6 x USB 2.0 (2x front, 2x rear, 2x internal)

Graphics (15-pin)

1 x VGA

Serial 1 (9-pin)

1 x serial RS-232-C,  usable for iRMC or system or shared

Serial 2 (9-pin)

1 as option (occupies PCI slot 1)

Parallel (25-pin)

1 x Centronics as option (occupies PCI slot 5)

Mouse / Keyboard (PS/2)

2

LAN / Ethernet (RJ-45)

2  x Gbit/s Ethernet

Service LAN (RJ45)

1 x dedicated service LAN port for iRMC S2 (10/100 Mbit/s) 

Service LAN traffic can be switched to shared onbord Gbit LAN port

RAID Controller

Integrated RAID 0/1 or RAID 5/6 controller for SAS base units (occupies one PCIe slot).

See under Components RAID controller

SATA Controller

ESB2-T, with two SATA channels for DVD + backup

LAN Controller

BCM 5708S, 2 x 10/100/1000 Mbit/s Ethernet (TCP/IP acceleration), PXE Boot or iSCSI 

boot via onboard LAN

Remote Management Controller

Integrated Remote Management Controller (iRMC S2, 32 MB attached memory incl. 

graphics controller), IPMI 2.0 compatible

Trusted Platform Module (TPM)

Infineon / 1.2 (option)

PCI-Express x4 (mech. x8)

6 x low profile 

PCI-X

1 x 64-bit / 133 MHz, 3.3 V

Slot Notes

Two of four PCI-Express x4 slots can be used as x8, if neighbour slot is empty.

1 x PCI-Express x4 occupied by modular RAID controller

Accessible drive bays

1 x 5.25/0.5-inch for CD-RW/DVD

1 x 3.5/0.5-inch for ServerView Local Service Panel  or Local Service Display or FDD

1 x 3.5/1.6-inch for backup devices (occupies 2x 3.5 or 6x 2.5-inch HDD bay)

Notes accessible drives

All possible options described in relevant system configurator.

Hard disk bays

12 x 2.5-inch hot-plug SAS

6 x 2.5-inch hot-plug SAS

6 x 3.5-inch hot-plug SAS/

SATA

Optional hard disk bays

6 x 2.5-inch hot-plug SAS

Fan configuration

4 hot-plug fans as standard, redundant fan unit with 4 hot-plug fans as option (1+1 

redundancy)

Operating buttons

On/off switch

NMI button

Reset button

Status LEDs

System status (amber / yellow)

Identification (blue)

Hard disks access (green)

Power (amber / green)

At system rear side:

System status (amber / yellow)

Identification (blue)

LAN connection (green)

LAN speed (green / yellow)

Service display

Optional:

ServerView Local Service Panel (LSP)

ServerView Local Service Display (LSD)