Frigidaire FFLE3911QW Installation Instruction

13

1.  If foam tub block has been removed, reinsert it now 

and retape the lid securely.

2.  Carefully cut the front and back corners of the left 

side of the remaining cardboard.

3.  With help from a second person, carefully tip the 

laundry center slightly to the left as shown in the 

picture below. First remove the foam shipping support 

to the right side only and then remove the foam 

base. Save these items for future use.

4.  Carefully lower the laundry center to an upright 

position and remove the tape holding the lid shut. 

Remove the foam tub block and other tub contents.

5.  From the back of the washer, remove the wire 

shipping clip securing the drain hose.

6.  DO NOT remove the PLASTIC CLAMP which secures 

the drain hose to the right side of the washer 

backsheet. It helps form a standpipe to prevent water 

siphoning.

To avoid back or other injury, have more than one 

person move or lift the appliance.

If the laundry center is to be transported at a later 

date, the tub blocking pad, foam base and tub support 

should be retained.

To prevent vibration, possible machine damage and 

maximize performance, the following steps must be 

completed.

7.  Carefully move the laundry center to within 4 feet of 

the fi nal location for the start of the installation.

WIRE CLIP

PLASTIC

CLIP

FRONT

Pull out

RIGHT side 

ONLY!