GE CHP9530SJSS Specification Sheet

Specification Created 1/15

Listed by 

Underwriters 

Laboratories

To insure accuracy, it is best to make a

template when cutting the opening in the counter

Electrical junction box 16" MIN.

below countertop

Cooktop

29-3/4"

21-3/8"

19-1/4"

28"

19-5/8"

to 19-3/4"

2-1/2" MIN.

Required

28-1/2" to

28-5/8"

1-3/4" MIN.

to rear wall

CHP9530SJ

4-5/8" at baffle near center of

unit (except when installed

above an approved wall oven)

and

3-1/4" at rear of air intake

13" MAX. depth of unprotected

overhead cabinets (when no

hood or microwave is installed)

30" MIN. from countertop to

unprotected cabinet (when

no hood or microwave is

installed)

2" MIN. clearance

to side wall from cut-out

on both sides of cooktop

15" MIN. height from countertop

to nearest cabinet (including

light rails) on both sides of

cooktop

Important: Requires a 5" free area between 

the bottom of the cooktop to any combustible 

material, i.e., shelving. Free area not required 
when installing wall oven underneath cooktop. 

Refer to installation instructions. Requires 
a 15" minimum from cooktop to adjacent 

overhead cabinets. Units are furnished with a 
48" flexible armored cable. 

note: 30" induction cooktops are approved for 

use over select GE 27" and GE 30" Single Wall 
Ovens and Warming Drawers. Refer to cooktop 
and wall oven/warming drawer installation 
instructions packed with product for current 

dimensional data. If installed with a GE Telescopic 
Downdraft System, consult both the cooktop 
and downdraft installation instructions packed 
with product before installing. Cooktop gas/
electric supply may need to be re-routed to install 
downdraft. The countertop cutout requires 
23-1/2" minimum flat countertop surface and 25" 

minimum total countertop depth. In addition, 
other clearances to front edge of the countertop 
must be considered. Before installing, consult 

installation instructions packed with product for 
 current dimensional data. 

DImensIons anD InstallatIon InformatIon (In Inches)

chp9530sJ 

 

240V 7.3
208V 6.4

240V 30.8 Amps

†

208V 30.8 Amps

†

†Note:  Check local codes for required 

breaker size

approxImate cookIng DImensIons