Viking TVDR4804IDB Installation Instruction
8
Clearance Dimensions
•This range may be installed directly adjacent to existing 36” (91.4 cm) high base cabinets.
IMPORTANT: The side panel MUST be 3/8” (.95 cm) above the adjacent base cabinet countertop. This can be accomplished by
raising the unit using the adjustment spindles on the legs.
IMPORTANT: The side panel MUST be 3/8” (.95 cm) above the adjacent base cabinet countertop. This can be accomplished by
raising the unit using the adjustment spindles on the legs.
•The range CANNOT be installed directly adjacent to sidewalls, tall cabinets, tall appliances, or other side vertical surfaces above
36” (91.4 cm) high. There must be a minimum of 6” (15.2 cm) side clearance from the range to such combustible surfaces above
the 36” (91.4 cm) counter height.
36” (91.4 cm) high. There must be a minimum of 6” (15.2 cm) side clearance from the range to such combustible surfaces above
the 36” (91.4 cm) counter height.
•Within the 6” (15.2 cm) side clearance to combustible vertical surfaces above 36” (91.4 cm), the maximum wall cabinet depth
must be 13” (33.0 cm) and wall cabinets within this 6” (15.2 cm) side clearance must be 18” (45.7 cm) above the 36” (91.4 cm) high
countertop.
•Wall cabinets above the range must be a minimum of 36” (15.2 cm) above the range cooking surface for the full width of the
range. This minimum height requirement does not apply if a range hood is installed over the cooking surface.*
must be 13” (33.0 cm) and wall cabinets within this 6” (15.2 cm) side clearance must be 18” (45.7 cm) above the 36” (91.4 cm) high
countertop.
•Wall cabinets above the range must be a minimum of 36” (15.2 cm) above the range cooking surface for the full width of the
range. This minimum height requirement does not apply if a range hood is installed over the cooking surface.*
Note: Minimum clearance for back wall 0”
*Note: When a rangehood is installed according to required
hood installation, cabinets can be installed directly above
the rangehood with no minimum clearance height.
hood installation, cabinets can be installed directly above
the rangehood with no minimum clearance height.
Note: Clearances from non-combustible materials are not
part of the ANSI Z21.1 scope and not certifi ed by CSA.
Clearances to non-combustible materials must be approved
by the authority having jurisdiction.
part of the ANSI Z21.1 scope and not certifi ed by CSA.
Clearances to non-combustible materials must be approved
by the authority having jurisdiction.
WARNING
BURN HAZARD
To avoid risk of personal injury; the use of cabinets for storage
above the appliance may result in a potential burn hazard.
Combustible items may ignite, metallic items may become
hot and cause burns. If a cabinet storage is to be provided the
risk can be reduced by installing a rangehood that projects
above the appliance may result in a potential burn hazard.
Combustible items may ignite, metallic items may become
hot and cause burns. If a cabinet storage is to be provided the
risk can be reduced by installing a rangehood that projects
horizontally a minimum 5” (12.7 cm) beyond the bottom of cabinets.
36”
(91.4 cm)
6” min
(15.2 cm)
13” max
(33.0 cm)
36” min
(91.4 cm)
18” min
(45.7 cm)
3/8” (0.95 cm)
36”
48”
Cutout
width
width
36”
(91.4 cm)
48”
(121.9 cm)
Range
Width
Width
35-7/8”
(91.1 cm)
47-7/8”
(121.6 cm)