Sub-Zero 427GLH Installation Instruction

Page of 36
5
M O D E L S   4 2 4  
A N D  
4 2 4 F S  
I N S T A L L A T I O N
A N T I - T I P B R A C K E T
I N S T A L L A T I O N
An anti-tip bracket and hardware is provided
with the Wine Storage unit. The anti-tip
bracket must be installed on a solid base to
prevent tipover in case several loaded wine
shelves are extended at the same time.
M O D E L   4 2 4
The anti-tip bracket should be attached to the
wall behind the unit with the bracket flange
located immediately above the top of the unit.
Refer to illustration 1 below.
A smaller metal ‘countertop’ bracket is also
provided with the Model 424, for installations
that need to be modified to provide a secure
surface for attaching the bracket. This bracket
will secure the front of the unit to the under-
side of the countertop, above the unit. Refer to
illustration 2.
M O D E L   4 2 4 F S
If you are installing the Model 424FS in a
space deeper than 24
5
/
8
" (625), the anti-tip
bracket must be installed no more than 24
5
/
8
"
(625) deep, so it engages the unit properly. It is
important that this measurement be made
from the front surface of the door, to the back
of the anti-tip bracket. Refer to illustration 3
below.
To prevent the unit from tipping forward
and provide a stable installation, the unit
must be secured in place with the anti-tip
bracket.
1
/
4
"
(6)
Anti-Tip
Bracket
Countertop
Bracket
Anti-Tip Bracket
Illus. 1
Illus. 2
Illus. 3
M O D E L S
4 2 4   |   4 2 4 F S