AGA ADC3GCRM Installation Instruction

NOTE: THESE INSTALLATION INSTRUCTIONS SHOULD BE LEFT WITH THE RANGE AND THE USER TO RETAIN

FOR FUTURE REFERENCE.

The AGA DC3 arrives on 1 pallet.

The AGA DC5 (Hotcupboard Option) arrives on 2 pallets.

Vent Pipe Installation kit (AG1M212542) arrives in a separate carton.

There must be access to the kitchen to manipulate a foot print of 39 

9

/

16

” (1005mm) x 29 

1

/

8

” (740mm). A wooden 

template (skate with castor wheels) of dimensions 39 

9

/

16

” (1005mm) x 29 

1

/

8

” (740mm) could be used to check if the

AGA Dual Control fully built appliance is able to fit through the property grounds and doors into its installation position in

the kitchen. It must also be considered that the height of the appliance is 37 

3

/

4

” (960mm) off pallet and 43 

1

/

4 

” (1100mm)

on the pallet, so high level obstacles/restrictions must not be overlooked.

     

If this skate/template can be manipulated through the property grounds and doorsinto position, then the AGA Dual 

     Control can be installed as intended with no re-work.

The installation of the range must be in accordance with the relevant requirements of the local Wiring and Building 

Regulations. It should be in accordance also with any relevant requirements of the local or state codes.

In your own interest and that of safety to comply with the law, all appliances should be installed by an authorized AGA 

distributor in accordance with the relevant regulations.

4