Dacor DYRTP486SLP Installation Instruction

Installation Instructions

Ridge on bottom

of burner cap

Ridge on bottom

of burner cap

Burner Component Installation

•  Never attempt to operate the rangetop with any of the 

burner parts removed.

•  Do not attempt to adjust the burner air mixture set-

tings. All adjustments are preset at the factory.

•  Remove the burner parts and grates from their shipping 

packages.

•  Install the burners as shown. Either type (color) of the 

supplied burner caps may be used. When installing the 

burner components, twist each piece back and forth 

slightly until it drops completely into place. The burners 

will not operate properly unless all of the burner pieces 

are properly seated.

•  Gently set the grates on top of the spill tray. Make sure 

that the rubber feet are positioned in the dimples. 

STEP 1: Install 

burner head. 

Put locating 

tap into keyed 

hole.

STEP 1: Put 

burner ring on 

top of the head.

STEP 3: Install 

burner cap. 

Ridge on cap 

must surround 

top of ring.

STEP 3: Install 

burner cap. Ridge 

on cap must sur-

round top of ring.

STEP 2: Install 

burner ring. Line 

up ring tabs 

with head slots. 

Twist back and 

forth to assure 

proper seating.

STEP 2: Turn 

ring until it drops 

into place. Twist 

back and forth 

to assure proper 

seating.