Dacor DYRTP486SLPH Installation Instruction

Installation Instructions

Unpack the Rangetop

•  If the gas and electric service provided does not 

meet the product specifications, do not proceed with 

the installation. Call the dealer, the gas supplier or a 

licensed electrician.

•  The rangetop is heavy. A minimum of two people are 

required to safely install it.

Unpack the parts box and verify that all required compo-

nents have been provided. If any item is missing or dam-

aged, please contact your dealer immediately. Do not install 

a damaged or incomplete appliance. The customer must 

report cosmetic issues within 30 days of installation.
•  3 Grates
•  8 standard burner caps (4 brass, 4 porcelain)*
•  4 standard burner rings
•  4 SimmerSear™ burner caps (2 brass, 2 porcelain)*
•  2 SimmerSear burner rings
•  2 SimmerSear burner heads
•  4 standard knobs
•  2 MAX GRIDDLE knobs
•  Dacor Stainless Steel Cleaner
•  WOK ring 
•  Griddle 
•  2 hold down bolts
•  2 washers (for hold down bolts)
•  Gas regulator 
•  Product literature
*The rangetop is supplied with two different types of burner 

caps (brass and porcelain) to suit the customer’s prefer-

ence.

Rangetop Installation

•  To prevent damage to the gas pressure regulator, 

install it only after the rangetop is mounted in its per-

manent position.

•  Do not over-tighten the hold down bolts. Over tight-

ening the hold down bolts may result in improper 

burner operation.

Do not use a hardening compound or caulk to 

permanently seal the rangetop into place. The rangetop 

must be readily removable if service is required. Removal 

of sealant to service the unit will be performed at the 

customer’s expense.

1.  Lower the rangetop into the cutout while feeding the 

electrical cord into the utility cutout. Center the ran-

getop in the cutout. 

2.  Secure the rangetop to the countertop using the two 

(2) provided hold-down bolts and washers provided. Do 

not overtighten the bolts.