Soleus HCCW10ESA1 Operating Guide

 

A storm window frame will not allow the air conditioner to 
tilt properly which in turn will keep it from draining properly. 
To adjust for this, attach a board or piece of wood to the 
sill. The board or wood piece should have a depth of at 
least 1 1/2”. Make sure the board or piece of wood is ap-
proximately 1/2” higher than the storm window frame. This 
will allow the air conditioner to tilt enough for proper drain-
age. (See FIG. 

4). 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

1.  Turn the air conditioner off, and disconnect the power 

cord. 

2.  Remove the sash seal from between windows, and 

unscrew sash lock. 

3.  Remove the screws installed through the frame and 

frame lock. 

4.  Close (slide) the side panels into frame. 
5.  Keeping a firm grip on air conditioner, raise the sash 

and carefully “rock” air conditioner backward to drain 
any condensate water in base of unit. Be careful not to 
spill any remaining water while lifting unit from window. 

6.  Store parts with the air conditioner in the box

. 

SASH 

1 1/2” MIN 

(38 mm) 

STORM   
WINDOW 
FRAME 

Board or wood 
piece must be 
approximately 
1/2” higher 
than the storm 
window frame 
for proper 
drainage 

  

  

FIG. 4