Soleus TDA30 Operating Guide

 7 

 

 

2)  Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER 

button once more to turn the unit off.  

3)  Humidity Selection - 

Press the                

or         

buttons to 

choose the desired relative humidity in the room. 

Each press of the button will change the desired room humidity by 5%. The room humidity is selectable 
from 35%-80% or continuous. The unit will cycle on and off to maintain the humidity level chosen on the 
digital display. If you want the dehumidifier to operate continuously regardless of the room humidity, press 
the MODE button until you see “CO” on the digital display. This will enable continuous operation and 
the “Continuous” indicator will light up on the control panel. 

4)  Fan Speed Control - Press the FAN SPEED Button to cycle through the different fan speeds: High, 

Medium, and Low. The fan speed can be visually distinguished by the fan speed indicators on the control 
panel. 

5)  Timer Auto On- To program the unit to automatically turn on, press the TIMER button when the unit is 

off. Press 

or    to increase or decrease the timer in 30 min increments (.5 hours) up to 10 hours. After 10 

hours, each  press of the  button will increase the timer in 1 hour increments up to 24 hours. Once the 
desired time is reached, the unit will automatically turn on.  

     Timer Auto Shut-Off- To program the unit to automatically turn off, press the TIMER button when the   

unit is on. Each press of the  or  buttons will change the timer setting in 30 min increments ( .5 hours) 
up to 10 hours. After 10 hours, each press of the  or  buttons will increase or decrease the timer in 1 
hour increments up to 24 hours. Once the desired time is over, the unit will automatically power off.