Vinotemp VT50SDSB Owner's Manual
OPERATING INSTRUCTIONS
1. Place your wine cellar on a flat surface that is strong enough to support
the unit when fully loaded.
2. This wine cellar is designed to be built-in (fully recessed) or freestanding.
3. Do not place heavy objects on top of the unit.
4. Do not place the unit in a moist place or display in direct sunlight.
5. Do not place the unit next to a major appliance that emits large amounts
3. Do not place heavy objects on top of the unit.
4. Do not place the unit in a moist place or display in direct sunlight.
5. Do not place the unit next to a major appliance that emits large amounts
of heat, such as a dishwasher, microwave, toaster oven, oven or
barbecue, etc.
barbecue, etc.
6. Do not plug unit into the same outlet as a refrigerator or microwave.
7. The unit’s cooling system operates efficiently with an ambient
7. The unit’s cooling system operates efficiently with an ambient
temperature of less than 90°F (32°C). Do not install in a garage or
basement.
8. Gently place/slide the racks in the wine cellar.
9. Determine the best setting to use: refer to the temperature guides for
9. Determine the best setting to use: refer to the temperature guides for
appropriate serving (see page 2). An easy reference guide for serving
temperatures can also be found on the doors interior.
temperatures can also be found on the doors interior.
10. Place bottles inside the cooler.
11. Plug the power cord into a standard electrical outlet.
IMPORTANT: When using the wine cellar for the first time, allow at least 24
hours for the internal temperature to adjust properly. Make sure there are at
least 3 to 5 bottles in the unit.
ALWAYS REMOVE ALL BOTTLES BEFORE MOVING THE WINE CELLAR
TEMPERATURE CONTROL
Important note: In order to operate efficiently, wine cellars should be in an
environment with an ambient temperature of less than 90°F (32°C).
Setting the temperature control (presets):
environment with an ambient temperature of less than 90°F (32°C).
Setting the temperature control (presets):
For your convenience, the wine cellar is programmed at the average storing
temperature. The temperature pre-set by the manufacturer is 54°F (12°C),
which the indicator will display. To change the preset temperature in the wine
cellar, simply press the preset button until the desired number appears.
Setting the temperature control (manually):
temperature. The temperature pre-set by the manufacturer is 54°F (12°C),
which the indicator will display. To change the preset temperature in the wine
cellar, simply press the preset button until the desired number appears.
Setting the temperature control (manually):
You can also manually adjust the temperature. Simply press the DOWN button
on the control panel to decrease the temperature and the UP button to increase
the temperature inside the wine cellar. The temperature range is from 45°F (7°C)
to 65°F (18°C).
on the control panel to decrease the temperature and the UP button to increase
the temperature inside the wine cellar. The temperature range is from 45°F (7°C)
to 65°F (18°C).
The upper zone will be approximately 8 - 9°F (4.4 - 5°C) warmer and the lower
zone will be approximately 8 - 9°F (4.4 - 5°C) cooler than the middle section.
The fluctuation temperature display is normal. It is normal for the temperature
display to fluctuate by roughly -5°F ~ 5°F (-2.8°C ~ 2.8°C).
zone will be approximately 8 - 9°F (4.4 - 5°C) cooler than the middle section.
The fluctuation temperature display is normal. It is normal for the temperature
display to fluctuate by roughly -5°F ~ 5°F (-2.8°C ~ 2.8°C).
8
W W W . V I N O T E M P . C O M