Smeg S9GMXU Instruction Manual
Instructions for the user
12
5. USING THE RANGETOP
WARNING
FIRE HAZARD
- For your safety: do not allow the burner flame to
extend beyond the edge of the pan.
- Turn off all controls when the range is not in use.
NOTE: Check that the burner heads, burner caps and grates are correctly positioned. Before lighting the
rangetop burners, check that each burner head is correctly positioned with its respective burner cap.
rangetop burners, check that each burner head is correctly positioned with its respective burner cap.
Before lighting the hob burners, make sure that the flame-spreader crowns are correctly positioned in
their housings with their respective burner caps. Make sure that the holes 1 in the flame-spreader
crowns are aligned with the igniters 3 and thermocouples 2.
their housings with their respective burner caps. Make sure that the holes 1 in the flame-spreader
crowns are aligned with the igniters 3 and thermocouples 2.
5.1
Ignition safety device
Each burner knob has a marking corresponding to the burner it controls (the example at the left, shows
the front left burner).
the front left burner).
The appliance is equipped with spark electrode ignition.
To light surface burners, push and turn the appropriate knob counterclockwise to the simmer flame
To light surface burners, push and turn the appropriate knob counterclockwise to the simmer flame
symbol
. To adjust the flame, turn the knob to any position between the maximum
and
minimum marks
.
To turn off, turn the knob to the
position.
REMEMBER: When the rangetop is in use, the entire range area may become hot
.
NOTE: Do not try to manually relight the flame.