GE PB960DJBB Specification Guide

Specification Created 3/15

Listed by 

Underwriters 

Laboratories

All GE ranges are equipped with

 

an Anti-Tip device. The installation

 

of this device is an important,

 

required step in the installation 

 

of the range.

PB960DJ/EJ/TJ 

30

24

3

3

7-1/2

Use a flush mount 

outlet receptacle.

Orient the receptacle 

so the length is 

parallel to the floor.

Acceptable electrical

outlet area:

w/o handle

w/handle

45

28-1/4

25-3/4

47

29-7/8

35-3/4

to

36-1/2

11

REcEPTaclE locaTions
Locally approved flexible service cord or conduit must 

be used because terminals are not accessible after range 
installation. See shaded area in drawing for location of 

electrical outlet box. Recommended outlet locations allow 
range to be installed directly against wall.
noTE: This appliance has been approved for 0" spacing 

to adjacent surfaces above the cooktop. However, a 6" 
minimum spacing to surfaces less than 15" above the 
cooktop and adjacent cabinet is recommended to reduce 
exposure to steam, grease splatter and heat.
insTallaTion infoRmaTion: Before installing, 

consult installation instructions for  current dimensional 

data and additional requirements.

16.0

12.0

40 Amps

†

40 Amps

†

 noTE: Check local codes for required breaker size. 

DimEnsions anD insTallaTion infoRmaTion (in inchEs)