Dacor DYRTP366SLPH Use & Care Manual

5

Standard Burners

1.  Put the burner rings on the burner bases as 

shown below. The bottom of the each burner 

ring fits inside the top of the burner base.

2.  Turn the ring until it drops into place. Twist each 

ring back and forth slightly to make sure it is 

properly seated.

3.  Put either the brass or porcelain burner caps on 

top of the burner rings. The ridge around the 

bottom edge of the cap goes around the top of 

the burner ring.

Installing the Grates

Gently set the grates on top of the spill tray. Put the 

legs of each grate into the corresponding dimples. 

Setting Up Your Rangetop

Burner and Grate Assembly

Assemble the burners and grates only when the rangetop 

is cool.

SimmerSear Burners

1.  Put the burner heads in place as shown below. 

The locating tab on the burner head goes in the 

keyed hole as shown.

2.  Put the burner rings on the burner heads as 

shown below. Match the tabs on the bottom of 

the ring to the slots on the burner head. Twist 

each ring back and forth slightly to make sure it 

is properly seated.

3.  Put the burner caps on top of the burner rings. 

You may use either the supplied brass or porce-

lain caps. The ridge around the bottom edge of 

the cap goes around the top of the burner ring.

Ridge on bottom 

of burner cap

Burner ring

Burner base

Slots

Tabs

Ridge on bottom 

of burner cap

Put locating tab 

into keyed hole

Burner ring

Burner head

Burner base

Keyed hole