Lynx LSB13 Use & Care Manual

Side burner acceSSory care & uSe/inStallation

the lynx power Burner incorporates a cast brass, dual-
ring, burner.

each ring can be independently operated for maximum heat
control. used together they can generate up to 47,000 Btu’s.

the knob on the left controls the outer burner ring and the
knob on the right controls the inner burner ring.

the hot surface ignition system provides reliable ignition.

the main grate can easily handle oversized stock pots and
removing the center grate accommodates a commercial
style round-bottom wok base (12 inch minimum).

the lynx power
Burner also features a
fully extendable stain-
less steel drip pan.

SmeLL oF GAS whiLe CooKinG

• perform a leak test (see indeX: “leak testing” for further

details.)

• check for blockages.

yeLLow FLAmeS

a yellow flame on the main burners indicates a lack of air.
But, if the air around the grill is dusty or if heavy grease is
present, some orange tips on the burner flame are normal.
• adJust the aiR shutteR

only do this When the accessoRy has cooled
doWn completely! make sure all grill controls are in the
“off” position.

1. Remove the cooking grates.

2. Reach under the drip guard and rotate the air shutters

to adjust.

3. ensure that the burner is seated correctly on the frame,

with the brass peg seated inside the positioning hole.

4. Re-light and check the flame.

USING THE LYNX POWER BURNER (LPB)

WarnIng!

IF YOU SMELL GAS WHILE THE GRILL ACCES-
SORY IS OPERATING, IMMEDIATELY TURN OFF ALL
BURNERS AND SHUT OFF THE MAIN FUEL SUPPLY.