Lynx LSB13 Use & Care Manual

Side burner acceSSory care & uSe/inStallation

  

|

3

1.  Before each use, complete the checklist below.

2.  make sure all burner control knobs are in the “off” position.

3.  push and hold the control knob for 2-5 seconds, allowing the igniter to heat up.

4.  turn the knob to the “lite” position.

5.  after ignition set the knob to the desired setting.

• do you smell gas? if yes, shut off everything and call the 

gas company or a qualified plumber to check for leaks, if 
not please continue.

• are you prepared to stay with the side burner during the 

entire cooking process? if not, gather what you need be-
fore starting the lighting process. if yes, please continue.

• is your cooking area free and clear of any combustibles, 

besides your food, that might ignite? if no, clear the area 
before starting the lighting process, if yes, please con-
tinue.

• do all control knobs turn freely? if not, call for service; if 

yes, please continue.

• if you are using a portable propane cylinder, is it connect-

ed and leak tested? if not, check the connection before 
continuing. if yes please continue. 

• do you know where your side burner’s main gas supply 

shut-off valve is located? if not, locate it before continu-
ing. if yes, please continue.

• are all burners properly seated in the side burner? if not, 

seat the burners properly before continuing. if yes please 
continue.

• is the wind blowing just lightly and not blowing on the 

side burner? if not, wait until the wind subsides or turn 
your free-standing grill so the wind goes into the front of 
the grill. if yes, please continue with the lighting process.

cHecKlist BeFore eacH use (For Your saFetY)

HoW to liGHt Your Grill accessorY

paRt no. 33487 Rev.c 01/14