Wolf 810919 Installation Instruction
Page 1 of 1
810920 / Rev A / June, 2007
8 1 0 9 1 9 S I D E - T R I M I N S T A L L A T I O N I N S T R U C T I O N S
CONTAINS:
QUANTITY
PART NUMBER
DESCRIPTION
2
810918
Trim, Pivot Extrusion Assy- SS
2
808442
Trim, Pivot Extrusion Assy- Black
1
801048
Rubber Gasket, Cooktop Surround
1
810920
Instructions
PROCEDURE:
IMPORTANT NOTE: This kit is for gaps wider than 1/8” up to 7/16”.
This side trim kit is for the SRT, Dual Fuel, Range and Rangetop and is designed to hide the gap between unit
and countertop edge. The kit contains two black trim pieces and two stainless steel colored trim pieces, for
customer preference.
and countertop edge. The kit contains two black trim pieces and two stainless steel colored trim pieces, for
customer preference.
Using the provided foam tape as a gap filler, place on both sides of trim piece. Depending on the gap size, it
may be neccessary to add layers of foam on the trim piece flange in order to achieve a snug fit after installation.
It is also important to make sure that the foam tape is added equally to both sides of the flange to keep the trim
piece centered in the gap (See Figure 1). Push trim piece into the gap between countertop and unit (See Figure
2).
may be neccessary to add layers of foam on the trim piece flange in order to achieve a snug fit after installation.
It is also important to make sure that the foam tape is added equally to both sides of the flange to keep the trim
piece centered in the gap (See Figure 1). Push trim piece into the gap between countertop and unit (See Figure
2).
Side Trim
Figure 1
Side Trim
Figure 2
Place foam tape equally to
both sides of trim piece.
both sides of trim piece.