Lynx L42PSR2LP Owner's Manual

electrIc IgnItIon

Warn

Ing

never attempt to light a burner if you smell gas.

always keep the lid open (side-burner lids must be completely

removed) when lighting your grill.

Releasing fuel into a closed grill before lighting will increase the

risk of explosion, property damage , personal injury or death.

Keep your face and body as far from the grill as possible when

lighting. any time a burner doesn’t light within 5 seconds, turn
off the control, wait 5 minutes for gas to dissipate, and repeat the
lighting procedure.

you neVeR leaV

lea

lea e the gRill unattended while cooKing.

Before proceeding, make

sure you have completed the

Before proceeding, make

“Before

sure you have completed the

each

sure you have completed the

use” checklist.

sure you have completed the

follow these steps to light any

of the burners on your grill:

ollow these steps to light any

first, make

sure all burner

control knobs

are set to off

for tHe maIn

brass burner

burner:

ush and hold the control

knob in for 2 seconds,

allowing the igniter to heat

up. then rotate the knob to

“lite”. after ignition, set

the knob to the desired heat

setting.

before

eacH

use

Before any use, always make

sure that:

... you do not smell gas

befor

... you do not smell gas

e you light the grill. if

... you do not smell gas

you do smell gas, shut every-

thing off and have a qualified

you do smell gas, shut every-

plumber check for leaks.

thing off and have a qualified

… the cooking area is free

and clear of any combustibles,

… the cooking ar

besides your food, that might

and clear of any combustibles,

ignite.

… the control knobs turn

freely.

… if you are using a

portable propane cylinder, it is

securely connected and leak

portable propane cylinder, it is

tested.

(see indeX: “cylinder

Retention instructions” for details.)

… you know where the

main gas supply shut-off is

… you know wher

located

main gas supply shut-off is

… the burners are seated

properly in the grill with

mounting legs in the slots.

properly in the grill with

strongly or blowing on the

back of grill.

ongly or blowing on the

for tHe rotIsserIe

burner:

a thermocouple sensor with a

safety valve that automatically

a thermocouple sensor with a

shuts off the flow of gas if the

safety valve that automatically

burner goes out.

(see indeX:

“windy conditions” for tips on how

to prevent burner blow out)

to light the r

otisserie burner,

push and hold the control

knob in for 2 seconds and

push and hold the control

then turn the knob to the

“lite” position.
after ignition continue

holding the contRol

KnoB in for 30 to 60

seconds. during this time the

thermocouple will heat up and

the safety valve will remain

thermocouple will heat up and

open.
if you release the control knob

before the thermocouple has

f you release the control knob

heated up, the safety valve

before the thermocouple has

will shut off the flow of gas to

heated up, the safety valve

the rotisserie burner and you

will have to re-light the burner.