Vinotemp VT32TSFE Owner's Manual
8
8
INSTALLATION
Remove all packing material before using your wine cooler.
IMPORTANT: Before connecting the unit to a power source, let it stand upright for
approximately 24 hours. This will reduce the possibility of a malfunction in the
cooling system from handling during transportation.
approximately 24 hours. This will reduce the possibility of a malfunction in the
cooling system from handling during transportation.
Clean the interior surface with lukewarm water and a soft cloth.
This unit is designed for freestanding, indoor use only. Position the unit in a dry and
well-ventilated place. Avoid placing the wine cooler near any source of heat or
moisture, or in direct sunlight. Do NOT install the unit in a location with an ambient
well-ventilated place. Avoid placing the wine cooler near any source of heat or
moisture, or in direct sunlight. Do NOT install the unit in a location with an ambient
temperature that will fall below 60°F.
For freestanding installation, 5 inches (127mm) of space between the back and sides
of the unit are suggested, which allows the proper air circulation to cool the
compressor and condenser for energy saving. Even for built-in installation, it is a
must to keep ¼” (6.35mm) space on each side and at the top to ensure proper
service access and ventilation. And the air vent at the front of the appliance must
never be covered or blocked in any way.
of the unit are suggested, which allows the proper air circulation to cool the
compressor and condenser for energy saving. Even for built-in installation, it is a
must to keep ¼” (6.35mm) space on each side and at the top to ensure proper
service access and ventilation. And the air vent at the front of the appliance must
never be covered or blocked in any way.
Place the wine cooler on a level surface strong enough to support it when it is fully
loaded. To level the wine cooler, adjust the front leveling legs at the bottom of the
loaded. To level the wine cooler, adjust the front leveling legs at the bottom of the
wine cooler.
For best performance it is recommended that you install the appliance in a location
with an ambient temperature between 72°-78°F. If the ambient temperature is
above or below recommended temperatures, the performance of the unit may be
affected.
with an ambient temperature between 72°-78°F. If the ambient temperature is
above or below recommended temperatures, the performance of the unit may be
affected.
It is recommended that you do not install the appliance near an oven, radiator or
other heating source. Direct sunlight may affect the acrylic coating and heat sources
may increase electrical consumption. Don’t install in a location where the
temperature will fall below 60°F (16°C). For best performance, do not install the
appliance behind a cabinet door or block the base grille.
other heating source. Direct sunlight may affect the acrylic coating and heat sources
may increase electrical consumption. Don’t install in a location where the
temperature will fall below 60°F (16°C). For best performance, do not install the
appliance behind a cabinet door or block the base grille.
Avoid locating the unit in moist areas.
Plug the wine cooler into an exclusive, properly installed-grounded wall outlet.
OPERATING YOUR WINE COOLER
CONTROLS
c
F
Temp.