Perlick HH24RS33R Installation Instruction

PERLICK RESIDENTIAL INSTALLATION MANUAL

10

perlick.com

8). Remove the Perlick nameplate from the door front 

using a plastic putty knife (Fig. 12). Install the new Perlick 

nameplate included in the kit.

Nameplate

9). Insert the bearing into the door hinge bracket (Fig. 13).

10). Insert the V-block into the door bottom hinge bracket 

and attach with the e-clip (Fig. 13). Note the orientation of 

the V-block.

Bearing in

door top hinge

bracket

oor botto  bracke t

b ock

B

 

rientation

11). Attach the top and bottom hinges and push plunger 

using screws removed in step 6 (Fig. 14). 

Top hinge

and screws

o o  hinge

and screws

Front panel

Corner screws need not be 

removed to remove front panel

7). Remove the front panel from the door assembly by 

removing the inner mounting screws, 4 per side, from the 

perimeter of the door assembly (Fig. 11). Rotate the front 

panel 180°. The top becomes the bottom. Reattach using 

the same screws and mounting holes.