Viking FDBB5363ER Installation Guide
3/4”
(1.9 cm)
End panel
1”
(2.5 cm)
1/4”
(0.6 cm)
Z-Bracket
21-3/4”
(55.2 cm)
21-3/4”
(55.2 cm)
24”
(61.0 cm)
Optional kickplate notch
(Dimensions determined by cabinets)
24”
(61.0 cm)
82-7/8”
(210.5 cm) min.
to
84-1/16”
(213.5 cm) max.*
82-7/8”
(210.5 cm) min.
to
84-1/16”
(213.5 cm) max.*
Custom Side Panel Dimensions
27
26
*Note: Depending on how high leveling feet are raised, and cabinet enclosure height.
Custom Panel General Information
Custom finishing options
• All installations must allow for the refrigerator
• All installations must allow for the refrigerator
and freezer door to open a minimum of 90˚.
• For side wall or corner installation, allow for a
standard 3” (7.6 cm) cabinet filler to assure
door(s) opens 90˚.
door(s) opens 90˚.
Note: If a custom handle is used, a wider filler
may be necessary.
may be necessary.
• Panel thickness must not exceed 1” (2.5 cm)
on hinge side. Thicker panels will interfere with
door swing and clearance.
door swing and clearance.
• Door panels should be installed after the
refrigerator has been plugged in for at least 24
hours.
hours.
Ice and Water Dispenser Bezel Removal
(if required)
Remove packaging material surrounding bezel.
Grasping the sliding lever, pull away from bezel.
Remove spill tray from lower part
of bezel exposing 2 screws.
Remove screws.
1
2
4
3
Note: Adding 3/4”
(1.9 cm) side panels adds
an additional 3/4” (1.9 cm)
to the overall width of
the product for each
side panel used.
(1.9 cm) side panels adds
an additional 3/4” (1.9 cm)
to the overall width of
the product for each
side panel used.
Note: Requires side panel
hardware kit (SPHKDS).
hardware kit (SPHKDS).