Danby DMW14SA1WDB Use & Care Manual

1. Touch CLOCK pad.

2. Use the number pads to enter the correct time. 

Note: This is a 12 hour clock. Only numbers between the range of 1:00-12:59 
can be set. 

3. Touch CLOCK pad again.

NOTE:

When the oven is fi rst plugged in or when power resumes after a power inter-
ruption, the display will show ENTER CLOCK TIME. If you prefer not to have the 
clock displayed, touch RESET. 

When setting the clock, if the stop/cancel button is pressed or if there is no op-
eration after 1 minute, the oven will go back to its resting state automatically. 

You can check the clock time during cooking by touching the CLOCK pad.

ONE SIGNAL: Oven accepts the entry.

TWO SIGNALS: Oven does not accept the entry. Check and try again.

1. Touch TIMER.

2. Enter the amount of time by touching the number pads (the maximum time is 
99 minutes 99 seconds.)

3. Touch START/+30SEC.

NOTE: 

Time countdown can be seen in display for 5 seconds before clock or cooking 
time is returned to display.

Touch TIMER and then touch RESET to cancel TIMER during timing process.

During timer operation, quick cook programs cannot be set. Time cannot be 

increased by pressing START/+30SEC.