Dacor DDW24S Installation Instruction

Installation Instructions

Installing the Unit in the Cabinet

1.  Position the dishwasher in front of the cabinet 

opening.

2.  Before sliding the unit into the cutout, make sure 

the drain hose, water supply line and power cable 

are positioned in the utility cutouts as shown 

below. Make sure each is routed to the side it will 

be connected. 

Exercise care when installing or removing the 

dishwasher to reduce the likelihood of damage to 

the floor and the power supply cable.

3.  Slowly and gently slide the unit into the 

dishwasher opening. As you do this, have 

someone gently pull the drain hose, water supply 

line and power cable through the access holes 

into the adjacent cabinets. Exercise care to make 

sure that the wiring and plumbing lines do not 

become damaged.

Power cable and 

water supply line

Drain hose

Connecting the Wiring (cont.)

4.  If a nonmetallic cable is being used, install a UL 

listed strain relief bushing on the back of the 

dishwasher.

5.  Connect the white wire on the cable to the “N” 

terminal on the dishwasher terminal block as 

shown below.

6.  Connect the black wire on the cable to the “L” 

terminal on the terminal block.

7.  Connect the ground (green) wire on the cable 

using a loop or spade terminal to the ground 

connection screw located on the dishwasher 

chassis.

8.  Re-install the electrical access panel and the toe 

kick brackets.

Neutral (N) 

terminal

Junction 

box

To house power 

supply

Terminal 

block

White to 

white 

(neutral)

Black to 

black (line)

Green to 

green 

(ground)

Line (L) 

terminal

Ground 

connection 

screw (chassis)

Water 

supply line

Drain hose

Power 

cable

2” dia. 

max.

1 1/2” dia. 

max.

1 1/2” dia. 

max.