Lynx L27PSR3 Owner's Manual

12

if a burner doesn’t light after 

several attempts, it can be 

match lit using the lighting rod 

stored in the drip tray. 
match-lighting your grill is 

done in one of three ways, 

depending upon which 

burners are being lit.
first, make sure you’ve 

returned all of the control 

knobs to the off position 

and have allowed 5 minutes 

for any accumulated gas to 

dissipate before attempting to 

match light a burner. 

manual lIgHtIng tube
your grill features individual 

manual lighting tubes for all 

main burners except for the 

right-most main burners.  

extremely cold temperatures 

may cause your prosear™ 

2 burner to light 

inside

 

the burner instead of 

out-

side

.  once lit, if you hear a 

‘whooshing’ sound, imme-

diately turn the burner knob 

off to extinguish the flame 

and then immediately re-

light the burner.

using the lighting rod, place a 

lit match in front of the manual 

lighting tube for the burner 

you wish to light. 

(see photo)

push and turn the correspond-

ing burner control knob to 

“lite”. if the burner doesn’t 

light within 5 seconds turn the 

knob off and wait 5 minutes 

before attempting to light it 

again. once lit, gas will stop 

flowing through the manual 

lighting tube.

rIgHt-most maIn burner
the right-most main burner, 

does not feature a manual 

lighting tube.  
to match-light this burner, use 

the lighting rod to insert a lit 

match through the cooking 

grate into the front slot of the 

briquette tray for that burner.

push and turn the correspond-

ing burner control knob to 

“lite”. if the burner doesn’t 

light within 5 seconds turn the 

knob off and wait 5 minutes 

before attempting to light it 

again.

prosear™ 2 burner
the prosear™ 2 burner, does 

not feature a manual lighting 

tube.  
to match-light this burner, use 

the lighting rod to insert a lit 

match through the cooking 

grate and through the protec-

tive screen.

push and turn the correspond-

ing burner control knob to 

“lite”. if the burner doesn’t 

light within 5 seconds turn the 

knob off and wait 5 minutes 

before attempting to light it 

again.