Lynx L27PSR3 Owner's Manual

19

it’s easy to keep your 

prosear™ 2 burner operating 

at peak performance.  Just run 

it on “hi” with the hood open 

for 5 minutes after each use to 

burn away any food particles 

or drippings. 
any ash accumulation on the 

burner screen can be removed 

with a light brush or vacuum 

… But wait until the 

BuRneR is cool! 

please check a few things before calling for service

:

 

► is there fuel supplied to the grill?

 

► is the main shut-off valve open?  

 

► are you using the correct type of fuel? (lp or natural gas) 

(See INDEX: “Gas Requirements” for further 

details.)

 

► Is your propane cylinder empty?  Have you recently refilled the propane cylinder?  If so, is the 

connection tight?  

 

► have you opened the valve on the propane cylinder?

 

► is the grill plugged in to a live electric circuit?

if you’ve checked the above items, review the trouble-shooting list below before calling for lynx for 

service.

heat shield Removed, 

Orifice/Venturi Position

every 3 to 6 months, remove 

the burner and inspect the 

venturi (inlet) and orifice to 

ensure that they’re  free of 

obstructions. 
food debris on the inside 

of the burner can be gently 

shaken out.  do not touch  

the ceramic surface.  

Inside View, Orifice all 

the way into venturi

when re-installing the 

prosear™ 2 burner, be sure to 

correctly position the burner.