Lynx L36PSR2NG Owner's Manual

21

First, confirm that the grill is 

getting electricity by turning 

on the lights, then:
  

checK the ignite

K

K

Rs 

your 

yy

lynx grill uses an electric 

ll

ignition system that does not 

spark.  instead, the igniters 

should glow constantly when 

spark.  

spark.  

a control knob is pushed in. 

…

ensure that all burner 

controls are set to off. 

off

off

…

Remove the cooking 

grates and briquette trays. 

…

watch an igniter as you 

push in and hold the 

corresponding control 

push in and hold the 

push in and hold the 

knob.  

esponding control 

esponding control 

you will need either 

esponding control 

esponding control 

yy

a small mirror or shiny 

metal object to see the 

igniter under its cover.  

(Be sure you push in the 

correct control knob and 

(Be sure you push in the 

(Be sure you push in the 

keep the knob in the 

“off

keep the knob in the 

keep the knob in the 

” position)  

keep the knob in the 

keep the knob in the 

…

check the remaining 

igniters.  if igniters don’t 

heck the remaining 

heck the remaining 

glow, proceed with trou-

bleshooting or match-

glow, proceed with trou-

glow, proceed with trou-

light the burner. 

checK the BuRneRs

if the igniters are working 

check to see if gas is 

f the igniters are working 

f the igniters are working 

reaching the burners by at-

tempting to match light a 

burner. 

tempting to match light a 

tempting to match light a 

Be caReful! if the

BuRneR fails to ignite, 

wait

w

w

 5 minutes BefoRe

attempting

a

a

to ignite

otheR BuRneRs! 

(see 

indeX: “match lighting” for 

further details.)

if match lighting doesn’t 

work, re-check fuel connec-

f match lighting doesn’t 

f match lighting doesn’t 

tions for leaks and ensure 

the supply is of the correct 

type and is of adequate 

the supply is of the correct 

the supply is of the correct 

if you smell gas while

the gRill is opeRating, 

immediately

immedia

immedia

tuRn off all

BuRneRs and shut off

the main fuel supply. 

supply

supply

peRfoRm a leaK test 

K

K

(see indeX: “leak test” for 

tt

further details.)

checK fo

K

K

R BlocKages 

K

K

(see indeX: “clean the Brass 

Burner” for further details.)

X: “leak test” 

tt

for further details.)

if the burner will light with a 

match, then the igniter may 

not be functioning correctly. 

match, then the igniter may 

match, then the igniter may 

call for service. 

not be functioning correctly. 

not be functioning correctly. 

if the burner will not match 

light, and you know you are 

getting gas, wait for any 

light, and you know you are 

light, and you know you are 

gas to dissipate and remove 

the burner and check it for 

gas to dissipate and remove 

gas to dissipate and remove 

blockages. 

(see indeX: “clean 

the Brass Burner” for further details.)

please check a few things before calling for service

:

is there fuel supplied to the grill?
is the main shut-off valve open?  
are you using the correct type of fuel? (lp or natural gas) 

(See INDEX: “Gas Requirements” for further 

details.)

Is your propane cylinder empty?  Have you recently refilled the propane cylinder?  If so, is the 

connection tight?  

Is your pr

Is your propane cylinder empty?  Have you recently refilled the propane cylinder?  If so, is the 

opane cylinder empty?  Have you recently refilled the propane cylinder?  If so, is the 

have you opened the valve on the propane cylinder?
is the grill plugged in to a live electric circuit?

if you’ve checked the above items, review the trouble-shooting list below before calling for lynx for 

ll

service.