Lynx L36PSR2NG Owner's Manual

Page of 48
32
UNpACKING
p
p
ANd ASSEMBLY
the grill arrives nearly ready 
to use and requires only minor 
assembly. 
By carefully following the 
uncrating and unpacking 
steps, you will improve the 
uncrating and unpacking 
uncrating and unpacking 
customer’s first Lynx experi
steps, you will improve the 
steps, you will improve the 
-
ence.
shipping weight on smaller 
units is app. 300 pounds and 
hipping weight on smaller 
hipping weight on smaller 
larger units may weigh over 
units is app. 300 pounds and 
units is app. 300 pounds and 
500 pounds.
crate & carton:
Important! 
do not remove staples 
around the top of the 
o not remove staples 
o not remove staples 
carton.  these staples 
around the top of the 
around the top of the 
hold a wooden pallet in 
hese staples 
hese staples 
place inside the carton 
hold a wooden pallet in 
hold a wooden pallet in 
that protects the unit from 
place inside the carton 
place inside the carton 
damage.  Removing these 
that protects the unit from 
that protects the unit from 
staples may cause the 
pallet to fall on the top of 
staples may cause the 
staples may cause the 
grill.
pallet to fall on the top of 
pallet to fall on the top of 
How to remove the 
carton
cut the main strap holding 
the grill to the pallet.
ut the main strap holding 
ut the main strap holding 
Remove the staples at the 
bottom
Remove the staples at the 
Remove the staples at the 
 of the carton.
Remove the staples at the 
Remove the staples at the 
lift off the carton. 
with assistance, remove 
the grill from the pallet and 
place into desired location. 
the grill from the pallet and 
the grill from the pallet and 
warning
EXCESSIVE WEIGHT HAZARD! 
Use two or more people to 
move or install this unit. Fail
Use two or more people to 
Use two or more people to 
-
ure to follow this instruction 
can result in back or other 
personal injuries.
the wheels sit down in the 
gaps of the shipping crate so 
that the grill can sit safely and 
gaps of the shipping crate so 
gaps of the shipping crate so 
solidly on the crate during 
shipping.  the grill cannot be 
slid directly off of the pallet.
shipping.  
shipping.   he grill cannot be 
he grill cannot be 
grill off of the pallet is by 
lifting one end of the grill 
grill off of the pallet is by 
grill off of the pallet is by 
high enough to place a ramp 
under  the wheel and then lift 
high enough to place a ramp 
high enough to place a ramp 
the other end while rolling the 
grill off of the pallet.
the other end while rolling the 
the other end while rolling the 
InterIor pac
p
p
KIng
lynx uses stur
ll
dy tie-down 
cables and straps to ensure 
your grill arrives at your home 
cables and straps to ensure 
cables and straps to ensure 
in the same condition that 
it left our factory.  Be suRe
you haV
ha
ha e RemoVed all
tie downs BefoRe using
youR gRill.
Remove the white 
accessory box and wood 
packing, the grill racks, and 
remove any loose items 
packing, the grill racks, and 
packing, the grill racks, and 
from the firebox.
emove any loose items 
emove any loose items 
carefully cut 
the cable ties 
securing the 
warming 
rack and 
rotisserie 
spit (if 
equipped). 
spit (if 
spit (if 
cut the strapping that 
secures the briquette trays 
ut the strapping that 
ut the strapping that 
and carefully lift them out, 
secures the briquette trays 
secures the briquette trays 
front first.  
and carefully lift them out, 
and carefully lift them out, 
ake 
sure you 
remember 
to remove 
the wire 
tie-downs on 
the burners. 
on prosear™ models, cut 
and remove ties from the 
burner partition on the left 
side of the 
burner partition on the left 
burner partition on the left 
pros
burner partition on the left 
burner partition on the left 
ear™ 
burner. 
packing from 
under
 the burner cover.) 
under
under
ensure that all burners are 
properly seated on the 
burner valve orifice and 
properly seated on the 
properly seated on the 
sitting level with the legs 
in the frame slots and no 
sitting level with the legs 
sitting level with the legs 
side-to-side movement.